Easy Fixes for Macard WiFi Extender Not Working

If your Macard WiFi extender isn't working properly, don’t stress. Most problems can be fixed quickly with a few simple tips. Whether it's finding the right spot for your extender, rebooting it, checking your router connection, or doing a full reset, these solutions can help you get back online fast.

Why Your Macard WiFi Extender Might Not Be Working

• The router isn’t connected correctly to the modem or the extender.
• The WPS setup between the router and extender didn’t complete successfully.
• The extender isn’t receiving any power.
• The extender’s setup wasn’t done properly.
• A red light is showing on the Macard extender, indicating a problem.

Now, let’s go over the best ways to troubleshoot and fix these issues.

How to Fix Your Macard WiFi Extender

1. Move the Extender to a Better Location

Your WiFi extender should be plugged into a working outlet located halfway between your router and the area with poor WiFi coverage. Try to avoid placing it near things like microwaves, cordless phones, or thick walls, as they can interfere with the WiFi signal.

2. Reboot the Extender

Sometimes, a simple restart can solve the problem. Unplug the extender from the power source, wait for about 10 seconds, and then plug it back in. This quick reboot can help clear any minor glitches.

3. Check the Router and Modem Connection

If your router isn’t properly linked to the modem, your extender won’t be able to boost the WiFi signal. Check that the router is connected to the modem with a good Ethernet cable, and inspect the cable for any damage or loose connections.

4. Make Sure the Extender Has Power

Verify that the extender is getting power from the outlet. If the outlet isn’t working, either fix it or move the extender to another outlet in a better location.

5. Reset the Extender

If none of the above steps work, resetting the extender to factory settings is a good idea. Here’s how:

• Find the Reset button (a small pinhole) on the side of the extender.
• Use a paperclip or similar tool to press and hold the button for 8–10 seconds, then release.
• Wait a few minutes for the extender to reset fully.

After the reset, you’ll need to set it up again. Here’s how to reconnect it:

How to Reconnect the Macard Extender

Using WPS:

• Press the WPS button on the extender.
• Within one minute, press the WPS button on your router.
• Wait for the WPS LED on the extender to turn solid, showing a successful connection.

Using the Web Interface:

• Connect your computer to the extender’s network (SSID).
• Open a browser and type go.macard.online or 192.168.10.1 in the address bar.
• On the login page, enter admin as the password (default).
• After logging in, select your home WiFi network.
• Enter your WiFi password to link the extender to the router.
• You can also set a new WiFi name and password for the extender.
• Be sure to SAVE your changes and refresh the device.

Frequently Asked Questions (FAQs)

How do I change the Macard WiFi extender password?

Access the extender’s dashboard by typing 192.168.10.1 into a web browser. Go to Settings > Wireless Settings > SSID, enter your new password, and click SAVE.

How do I switch frequency bands on the extender?

Log in at 192.168.10.1 or go.macard.online, then go to Settings > Wireless Settings > Channels. Choose the best band (2.4GHz or 5GHz) based on your needs and home layout.

Where should I plug in the Macard WiFi extender?

Place it between your router and the area where you have a weak or no WiFi signal. It should still be close enough to the router to catch a strong signal.

How do I connect the extender to the router with WPS?

Press the WPS button on your extender first, then press the WPS button on the router within a minute. When the WPS light on the extender stays solid, the devices are connected.